JVC TK-C1460 - Manual (Page 40)

E-40
MODE S EL E C T
CAMERA T I T L E ED I T . .
RE V ERS E MODE
OF F
AL M . T I T L E S Z E I D OUBLE
AL A RM COLOUR WH I T E
AU X T E R M I N A L (B&W IN)
D. Z O O M M A X x2
Output of Black-White/Color switching signal
It is possible to output black-white/color switching signal from the AUX terminal on the back of
this unit. Perform the following settings.
Ⅲ Set the B&W Item to AUTO.
1.
Select the B&W/COLOR MODE item on
the ALC SETTING screen.
2.
Press the SET button.
The B&W/COLOR MODE screen
appears.
3.
Press either the button or the
button and select the B&W item.
4.
Press either the button or the
button and set to “AUTO”.
5.
Upon completion of setting, press the
MENU button twice.
Then, the MAIN MENU screen is
brought back.
Ⅲ Set the AUX TERMINAL Item to
B&W OUT.
1.
Select MODE SELECT on the MAIN
MENU screen.
2.
Press the SET button.
The MODE SELECT screen appears.
3.
Press either the button or the
button and select the AUX TERMINAL
item.
4.
Press either the button or the
button and set to ”B&W OUT”.
5.
Upon completion of setting, press the
MENU button twice.
• Then, the normal screen is brought
back.
B&W
L E V E L
N ORMAL
A UT O
B&W/COLOR MODE
CAMERA
SETUP
SET
MENU
AWC
SET button MENU button
MEMO
• When you use infrared illumination, if the
subject excessively reflects, a B/W screen
can switch to a color screen.
To perform switching with higher accuracy,
we recommend that you use it by the setting
mentioned in [Control by Black-White/Color
Switching Signal From the Outside],
referring to Page 41.
CAUTION:
When you use near infrared ray illumina-
tions, use a lens that is compatible with
the near infrared ray illuminations. Any lens
other than the compatible one can result
in out-of-focus due to such characteristics.