JVC TK-C1460 - Manual (Page 43)

E-43
Image pickup device: TK-C1460U
1/3 type IT CCD, 768 (H)
× 494 (V)
TK-C1460E
1/2 type IT CCD, 752 (H)
× 582 (V)
Synchronization method : Internal, Line lock, Full Genlock
Scanning frequency: TK-C1460U
(H) 15.734 kHz, (V) 59.94 Hz
TK-C1460E
(H) 15.625 kHz, (V) 50 Hz
Resolution: 480 TV lines (H)
VIDEO OUT: Composite video signal 1 V (p-p), 75
Ω (BNC)
Y/C OUT: TK-C1460U (4-pin)
Y: 0.714V(p–p), 75
Ω
C: 0.286V(p–p), 75
Ω
TK-C1460E (4-pin)
Y: 0.7V(p–p), 75
Ω
C: 0.3V(p–p), 75
Ω
Video S/N ratio: 50 dB (AGC OFF)
Minimum required illumination: 0.8 lx (50%, F1.2, AGC 20 dB)
0.4 lx (25%, F1.2, AGC 20 dB)
0.02 lx (50%, F1.2, AGC 20 dB, B&W MODE)
0.025 lx (50%, F1.2, AGC 20 dB, SENSE UP
× 32)
Communication: RS-422A or RS-485 (switchable)
9600 bit/s
Lens mount: C/CS mount
Power supply and power consumption:
TK-C1460U
AC24V `, 60 Hz, DC12V — --- 6.0 W
TK-C1460E
AC 24 V ` 50 Hz/60 Hz, DC 12 V — --- 550 mA
Ambient temperature: –10°C to 50°C (operation)
0°C to 40°C (recommended)
Mass: 640 ˝
Accessory: TK-C1460U
Instructions ......................... 1 Ferrite core ................ 1
4P plug ............................... 1 Warranty card ............ 1
Service Information card .... 1
TK-C1460E
Instructions ......................... 2 Ferrite core ................ 1
4P plug ............................... 1
Specifications (Continued)
Design and specifications are subject to change without notice.