JVC KD-AV7010 - Manual (Page 46)

46
ENGLISH
AUTO OPEN/CLOSE
• AUTO: The monitor comes out* or goes in
automatically when you turn on or off
the power.
• OFF: Cancels this function.
* If you close the monitor before turning off the
power, the monitor will not come out next time you
turn on the power.
BLIND CONTROL
• ON: The monitor works as Touch Panel
when playing back pictures on the
monitor.
– The boundaries cannot be shown on
the monitor screen. This example
is just to teach you where to touch
on the Touch Panel when you
operate on it.
1 Upper/lower portions:
Adjust the volume.
2 Left/right portions:
• Skips the chapters/tracks for
DVD/VCD.
• Searches the chapters/tracks for
DVD/VCD.
• Searches for TV channels for TV
(see page 63).
3 Center portion:
Turns on and off the on-screen
icons. (This also works even if
“BLIND CONTROL” is set to
“OFF.”)
• OFF: Cancels this function.
BEEP TONE
• ON: Touch tone beeps when you touch the
Touch Panel icon.
• OFF: Cancels this function.
WIRING CHECK
You can confirm the wiring connection is
correctly done for particular functions.
• When the listed wires have been connected
and electrical signals are detected through the
wires, the corresponding indicators light up.
Indicators
1
1
2
2 3
43-48_KD-AV7010[J]f.p65 2/14/05, 2:20 PM 46