JVC KD-AV7010 - Manual (Page 67)

67
ENGLISH
It is required to activate your SIRIUS
subscription after connection:
• If the power is turned off before
subscription is completed, repeat the
procedure from beginning.
1 Turn on the power.
2 Select “SAT (SIRIUS).”
JVC DLP starts updating all the SIRIUS
channels. (See GCI update on the left
column.)
• Once completed, JVC DLP tunes in to
the preset channel, CH184 (channel for
subscription guidance).
3 Check your Sirius ID, see page 72.
4 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can
call SIRIUS toll-free at 1-888-539-
SIRIUS (7474).
“SUBSCRIPTION UPDATE PRESS
ANY KEY TO CONTINUE” appears on
the monitor (“SUB UPDT PRESS ANY
KEY” scrolls on the display) once
subscription has been completed.
SIRIUS ® Radio Operations
SIRIUS is a satellite radio that can deliver
digital-quality sound.
SIRIUS has 65 music channels (all
commercial-free) and 50 channels of sports/
news/entertainment programs.
You can enjoy and control the SIRIUS radio
digital entertainment channels from this unit
by connecting the JVC SIRIUS radio (DLP:
Down Link Processor—optionally
purchased) to the CD changer jack on the
rear.
GCI (Global Control Information) update:
• If channels are updated after subscription,
updating starts automatically.
“CHANNELS UPDATING XX%*
COMPLETED” appears on the monitor
(“UPDATING” appears on the display). No
sound can be heard.
• Update takes a few minutes to complete.
• Do not press any button/icon or perform
any operation until updating has been
completed—“CHANNELS UPDATED”
appears on the monitor (“CHANNELS
UPDATED” scrolls on the display).
Before operating your SIRIUS radio:
• For connection, see Installation/Connection
Manual (separate volume).
• Refer also to the Instructions supplied with
your SIRIUS radio.
* Changes when every 20% of update is
completed (ex. 20%, 40%, 60%).
then
67-72_KD-AV7010[J]f.p65 2/14/05, 2:28 PM 67