Names of parts (continued), Introduction rear panel – JVC RM-LP25U User Manual
Page 16
6
Rear panel
A
[ACHIN] Connector
Connect this socket to a commercial power supply outlet
using the power cord provided.
B
[TALLY] Terminals
These terminals input the tally control signals.
(A Page 14 [Tally])
C
[INTERCOM] Terminals
These terminals input and output the intercom signals.
In a system composed of multiple cameras and remote
control units, the intercom function provides
intercommunication between operators.
(A Page 14 [Intercom])
D
[AUX VIDEO INPUT] Connectors
These connectors are used to input the return video signal,
which returns the SEG (Special Effects Generator) or
switcher output signal to the camera viewfinder.
These two connectors are loop-through connected inside to
enable a bridge connection.
They are terminated automatically when they are not bridge-
connected. Input VBS.
E
[GENLOCK INPUT] Synchronous Signal Input
Connectors
These connectors are for reference sync signal input.
These two connectors are loop-through connected inside to
enable a bridge connection.
They are terminated automatically when they are not bridge-
connected.
Input BB or Tri-level sync signal.
F
[Y/G, P
B
/B, P
R
/R] Component Video Signal Output
Connectors
The settings of the output signals from these connectors can
be switched between Y/P
B
/P
R
, G/B/R using the Signal
Serect switch on the connected camera or by using the menu
setup of the camera.
G
[COMPOSITE VIDEO] Signal Output Connector
This connector outputs VBS (composite video) signal.
H
[HD/SD SDI INPUT/OUTPUT] SDI signal input and
output connectors
These are HD/SD SDI signal input/output connectors.
SDI signal that is input will be output from the [HD/SD SDI
OUTPUT] connectors.
Memo :
● Transferred signals cannot be output via the camera cable
from the [HD/SD SDI OUTPUT] connector on
RM-HP790DU/RM-HP790DE. Signals will be output in the
same format as the input signals to [HD/SD SDI INTPUT]
connector.
I
[REMOTE] Connection Connector of Remote Control
Panel
This connector connects to the remote control panel and
controls the camera.
When connected, remote control panel operations will take
priority over operations from RM-HP790DU/RM-HP790DE
(3: FILE, 4: PROCESS, 5: OPERATION).
REMOTE
HD/SD SDI
Y/G
P
B
/B
P
R
/R
INPUT
OUTPUT
AC
H IN 230V H 50Hz
TALLY
PGM
PVW
C
INTERCOM
AUX VIDEO INPUT
GENLOCK INPUT
VIDEO OUTPUT
H
C
G
COMPOSITE VIDEO
CAMERA CABLE
REMOTE
Y/G
P
B
/B
P
R
/R
AC
H IN AC120V 60Hz
TALLY
PGM
PVW
C
INTERCOM
AUX VIDEO INPUT
GENLOCK INPUT
VIDEO OUTPUT
H
RTS
C
G
COMPOSITE VIDEO
CAMERA CABLE
HD/SD SDI
INPUT
OUTPUT
A
B
C
D
E
F
G
H
I
J
A
B
C
D
E
F
G
H
I
J
Ⅵ RM-HP790DU
Ⅵ RM-HP790DE