JVC RM-LP25U - Manual (Page 31)

21
This menu is used to set the camera cable length to the length actually used.
(A Page 12 [Adjustments for Genlock Operation])
* Default values are indicated in bold characters.
*1 This function is unavailable when connected to GY-HM790 series.
Memo :
● Either
[1A: SD H PHASE] or [1B: HD H PHASE] will appear depending on the Video Format of the camera.
This menu sets the camera cable length according to the actual length used.
(A Page 12 [Camera Cable Length Setup])
* Default values are indicated in bold characters.
GENLOCK Menu
No. Item Setting Values Function
1A SD H PHASE
*
1 -128 to 0 to 127 Adjustment of the Horizontal sync phase of genlocking.
1B HD H PHASE -1024 to 0 to 1023 Adjustment of the Horizontal sync phase of genlocking.
1C SC COARSE
*
1 0 Њ,
90 Њ, 180Њ, 270Њ
Coarse adjustment of the color phase of genlocking. Use a vectorscope, etc.
1D SC FINE
*
1 -128 to 0 to 127 Fine adjustment of the color phase, which should be performed after completing the
[SC COARSE] adjustment.
If the subcarrier cannot be adjusted with [SC FINE], restart the adjustment from
[SC COARSE].
1Z BACK ^ Return to the previous display.
CABLE Menu
No. Item Setting Values Function
2A LENGTH 5M,
20M,
50M, 100M Set according to the total length of the camera cables in use.
2Z BACK ^ Return to the previous display.