JVC RM-LP25U - Manual (Page 42)

32
General
Output Signals
Input Signals
Specifications
Composite video signal : 1 V (p-p), 75 K, 1 output
R/G/B signals : 0.7 V (p-p), 75 K, x1 each (without
sync)
Y/P B /P R signals
Y : 1 V (p-p), 75 K
P B : 0.7 V (p-p), 75 K
P R : 0.7 V (p-p), 75 K
(75% color bar)
Intercom
RM-HP790DU : 2-line system, -10 dB, 220 K,
unbalanced RTS
(The RTS terminals are not designed
to accept a voltage supply.)
RM-HP790DE : 2-line system, -10 dB,
600 K, balanced
Remote : 5.0 V (p-p)
[HD/SD SDI OUTPUT]
HD SDI : SMPTE292M-compliant
Signal level: 0.8 V(p-p)
Max transfer distance: 100 m
SD SDI : SMPTE259M-compliant
Signal level: 0.8 V(p-p)
Max transfer distance: 100 m
TC : Supported
AUDIO : Supported
No. of output
connectors
: 2 outputs
Tally
RM-HP790DU : Contact supply : DC 10 V, 3 mA or more
RM-HP790DE : Voltage supply : AC 6.3 V, DC 5 to 24 V
Non-switching between AC and DC
Intercom
RM-HP790DU : 2-line system, -10 dB, 220 K,
unbalanced RTS
(The RTS terminals are not designed
to accept a voltage supply.)
RM-HP790DE : 2-line system, -10 dB,
600 K, balanced
Remote : 5.0 V (p-p)
[HD/SD SDI INTPUT]
HD SDI : SMPTE292M-compliant
720p/60/50
1080i/60/50
SD SDI : SMPTE259M-compliant
480i/60
576i/50
No. of output
connectors
: 1 input
[GENLOCK INPUT]
HD : Y signal: 1 Vp-p, 75 K or Tri-level
sync signal: 0.6 V(p-p), 75 K loop-
through output
SD
RM-HP790DU
:
VBS signal: 1 V(p-p), 75 K or Black
Burst signal: 0.43 V(p-p), 75 K loop-
through output
RM-HP790DE : VBS signal: 1 V(p-p), 75 K or Black
Burst signal: 0.45 V(p-p), 75 K loop-
through output
[AUX VIDEO INPUT]
SD : VBS signal: 1 V(p-p), 75 K loop-
through output