JVC RM-LP25U - Manual (Page 33)

23
This menu sets the functions built into the camera.
* Default values are indicated in bold characters.
Memo :
● Functions not available on the camera cannot be controlled from this unit.
*1 This function is unavailable when connected to GY-HM790 series.
PROCESS Menu
No. Item Setting Values Function
4A DETAIL OFF
ON ON/OFF setting of the detail enhancement function.
OFF
: Detail enhancement is activated.
ON : Detail enhancement is deactivated.
4B DETAIL LEVEL -10 to NORMAL to 10
(21 steps) Adjusts the detail enhancement level.
Increasing the level
: Sharpens details.
Decreasing the level : Softens details.
4C DETAIL V/H -10 to NORMAL to 10
(21 steps) Selects whether the detail enhancement is applied more strongly in a horizontal or
vertical direction.
Increasing the level
: Applies detail enhancement more strongly in a H direction.
Decreasing the level : Applies low detail enhancement in the H direction.
Memo :
● This item cannot vary the detail enhancement in the V direction.
4D DETAIL FRQ LOW
MIDDLE
HIGH
AUTO Sets the detail enhancement frequency according to the object.
LOW
: Low frequency to be used when shooting a coarsely patterned object.
MIDDLE : Standard frequency.
HIGH : High frequency to be used when shooting a small or finely patterned object.
AUTO * 1 : Automatic adjustment of the detail enhancement frequency according to
the object.
4E SKIN DETAIL OFF
ON ON/OFF setting of the skin tone detail function, which displays natural, wet skin colors by
reducing detail enhancement on the skin areas.
OFF
: Skin tone detail function is deactivated.
ON : Skin tone detail function is activated.
4F AUTO KNEE OFF
ON ON/OFF setting whether the [AUTO KNEE] function is activated according to the knee
point setting to be made below.
OFF
: [AUTO KNEE] function is deactivated.
ON : [AUTO KNEE] function is activated.
4G KNEE POINT -10 to NORMAL to 10 Sets the knee point level at which the [AUTO KNEE] function is deactivated.
Increasing the level : The knee function is activated at a higher video level.
Decreasing the level : The knee function is activated at a lower video level.
Memo :
● The actual variation in the knee point occurs step by step because this is set as a
result of the knee point setting of the camera.
4H COLOR MATRIX
*
1 OFF
ON ON/OFF setting of whether the color matrix function.
OFF
: The color matrix function is deactivated.
ON : The color matrix function improves the color reproducibility. Note that noise
increases with this setting.
4I V.RESOLUTION
*
1 NORMAL
V.MAX Increases the vertical resolution.
NORMAL
: Standard value.
V.MAX : Increased value.
Memo :
● When the vertical resolution is increased, the sensitivity deteriorates and bright areas
of objects may appear to be colored.