JVC RM-LP25U - Manual (Page 40)

30
General
When RM-HP790DU/RM-HP790DE is connected to a
camera, all features that are available on RM-HP790DU/RM-
HP790DE can only be controlled by RM-HP790DU/RM-
HP790DE, and control of these features using the camera is
disabled.
Switches on the camera that are disabled, as well as
disabled menu items are as follows.
Standard connection of RM-HP790DU/RM-
HP790DE (Connection of 2 units)
● GAIN
● SHUTTER
*
1
● WHT.BAL
● FULL AUTO
*
2
● User 1, 2 and 3 with the following features assigned
● BARS
● B.STRETCH1-5
● B.COMPRESS1-5
● AE LEVEL +
● AE LEVEL؁
*1 : [SHUTTER] will also be disabled if the setting is
A VARIABLE B or below A 1/30 B (When Frame rate is A60/
24 B) or A 1/25 B (When Frame rate is A50B).
*2 : Setting is configured from RM-HP790DU/RM-
HP790DE regardless of the status of the [FULL AUTO]
switch.
Menu items that are disabled
*3 : [CINEMA] is forcibly set to
AOFFB. To adjust MATRIX,
make ues of the menu on the camera.
*4 : [GAMMA] is fixed at the menu setting value of the
camera before connecting to the remote control.
However, when the menu setting value is
AOFFB,
[GAMMA] will be forcibly set to ASTANDARDB.
Operation of Connected
Camera
Menu Page Function
Menu Display on
RM-HP790DU/RM-
HP790DE
CAMERA
OPERATION AE LEVEL
REMOTE SMOOTH TRANS
BARS
CAMERA PROCESS
[1/2] MASTER BACK
REMOTE
DETAIL
DETAIL V/H
DETAIL FRQ
SKIN DETECT
CAMERA PROCESS
[2/2] BACK
REMOTE
KNEE
LEVEL
DNR
ADVANCED
PROCESS CINEMA [OFF]* 3
GAMMA [STANDARD]* 4
[CINEMA]* 4
[FILMOUT]* 4
LEVEL REMOTE
WHITE BALANCE WHITE PAINT R
REMOTE
WHITE PAINT B
GENLOCK SD H PHASE
REMOTE
HD H PHASE
SC COARSE
SC FINE