JVC RM-LP25U - Manual (Page 21)

11
Mount this unit to the EIA rack.
1
Remove the screws A on the four stands at the
bottom
Remove the stands.
2
Mount the unit to the rack using the screws B
Secure to the rack with the optional screws x4 (M5 x 10 mm)
.
Memo :
● If the RM-HP790DU/RM-HP790DE is rack-mounted, be
sure to insert ventilated panels above and below it in order
to improve ventilation. Do not stack two RM-HP790DU/
RM-HP790DE units or place any object on top of a RM-
HP790DU/RM-HP790DE unit.
● In addition, make sure to keep surrounding temperature of
this unit below 40f during use.
1
Connect the camera to the RM-HP790DU/RM-HP790DE
using a proper connection method
2
Press the [POWER] switch of the RM-HP790DU/RM-
HP790DE to ON
Memo :
● When an item is controllable from both the RM-HP790DU/
RM-HP790DE and the camera, the control from the
camera is defeated. Functions not available on the
camera cannot be controlled from this unit.
● When connecting the RM-HP790DU/RM-HP790DE to the
camera, do not connect a local remote controller to the
camera.
● After turning the RM-HP790DU/RM-HP790DE OFF, wait
at least 10 secends before turning it ON again.
Rack Mounting
B
B
A
Rack mount bracket
(x4)
Turning the Power ON
PAINT AUTO
B R
W.BAL
AUTO
MANU
WHITE MASTER BLACK POWER
I
O
IRIS
P
B
A
PRESET
CLOSE OPEN
MID
REMOTE CONTROL UNIT RM-HP790
[POWER] switch