Jaguar XJ - Manual (Page 124)

L
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XJ
Telephone
124
PAIRING AND CONNECTING USING
THE MOBILE PHONE
Rather than using the telephone system to
search for your phone, you can choose to pair
and connect to the system from your mobile
phone.
Note: The process of pairing and connecting
your phone with the vehicle using the mobile
phone will vary depending on the type of
mobile phone used.
1. Switch the ignition system on and ensure
that the touch screen is active.
2. From the home menu, select Phone.
3. A menu will appear. Select Use handset.
Note: The time that the vehicle’s
Bluetooth® system is discoverable is
limited to 3 minutes.
Note: The vehicle’s Bluetooth® PIN must
be the same as entered on the phone.
4. Using the mobile phone, search for
Bluetooth® devices. On some phones, this
is referred to as new paired device. See
your phone's operating instructions for
further information.
5. When the vehicle's Bluetooth® system is
discovered (named Jaguar XJ) by the
mobile phone, use the phone to begin
pairing. Either the mobile phone or the
vehicle’s Bluetooth® system will ask you
to enter a Personal Identification Number
(PIN). Enter a PIN of your choice and press
OK.
6. Enter the same PIN into the other device.
Note: The vehicle’s Bluetooth® PIN must
be the same as entered on the phone.
7. Once your phone is paired and connected
to the system, a confirmation message will
be displayed before switching to the Digit
Dial screen.
Note: Some mobile phones do not
automatically connect and will require to be
manually connected via the handset or using
the Change phone option.
PAIRING AND CONNECTING USING
THE TOUCH SCREEN
1. Switch on your mobile phone’s
Bluetooth® connection using the phone’s
menu. Make sure that your mobile phone is
in Bluetooth® ‘discoverable’ mode,
sometimes referred to as ‘find me’ mode
(see your phone’s operating instructions
for more information).
2. Switch the ignition system on and ensure
the touch screen is active.
3. From the home menu, select Phone.
4. A menu will appear. Select Search new.
5. Identify your phone from the displayed list
and select the corresponding Pair and
connect option.
Note: If more than 5 phones are detected,
it may be necessary to use the scroll bar to
see the entire list.
6. When prompted, enter the 4-digit code into
your phone (see your phone’s operating
instructions for more information).
7. Once your phone is paired and connected
to the system, a confirmation message will
be displayed before switching to the Digit
Dial screen.
Note: Some mobile phones require the
Bluetooth® pairing to be set as ‘authorised’ or
‘trusted’ in order to automatically connect.
Please see your phone’s operating instructions
for further information.