Convenience mode, Remote key fob care, Remote key fob battery replacement – Jaguar XJ User Manual

Page 9: Entering the vehicle

Advertising
background image

R

(FM8)

SEMCON JLR OWNER GUIDE VER 1.00

EURO

LANGUAGE: english-en;

MARQUE: jaguar;

MODEL: XJ

Entering the vehicle

9

Note: Drive-away locking can be enabled/
disabled via the Vehicle Set-up area of the
instrument panel menu.

CONVENIENCE MODE

When the door is opened using either the
Jaguar Smart Key or keyless entry, the
vehicle's electrical system initiates the
convenience mode. The following systems
become functional:
• Driver position memory.
• Seat and steering column adjustment.
• Interior and exterior lighting.
• Message centre.
• Auxiliary power socket.

REMOTE KEY FOB CARE

To prevent accidental operation,
which may result in an injury, never
leave the Jaguar Smart Key in the
vehicle if children or animals are also
left in the vehicle.

Do not expose to extremes of heat, dust,
humidity or allow contact with fluids. Do not
leave the transmitter exposed to direct
sunlight.

The emergency key blade number is recorded
on an attached label. Peel off the label and
attach it to the designated area on the Security
Card, supplied in the literature pack. Keep the
Security Card safe, but not in the vehicle.

The operational range of the Jaguar Smart Key
will vary considerably depending on
atmospheric conditions and interference from
other transmitting devices.

Note: The radio frequency used by the Smart
Key may be used by other devices (e.g. medical
equipment). This may prevent the Smart Key
from operating correctly.

REMOTE KEY FOB BATTERY
REPLACEMENT

Note: There are two designs of Smart Key,
refer to the information which is relevant to the
design of Smart Key supplied with the vehicle.

When the battery needs renewing, there will be
a significant decrease in the effective range and
the message SMART KEY BATTERY LOW is
displayed in the message centre.

To replace the battery:

1. Press the release button on the side of the

Smart Key.

2. Open the Smart Key cover.

3. Remove the battery drawer.

4. Remove the battery.

Fit a new CR2032 type battery (available from
your Dealer/Authorised Repairer), with the
positive (+) side upwards.

Advertising