Heated screens, Recirculation, Air quality sensor – Jaguar XJ User Manual

Page 60: Heating and ventilation

Advertising
background image

L

(FM8)

SEMCON JLR OWNER GUIDE VER 1.00

EURO

LANGUAGE: english-en;

MARQUE: jaguar;

MODEL: XJ

Heating and ventilation

60

8. Front screen heater: Press to switch on/off.

9. Air distribution to screen: Touch to turn

on/off.

10. Air distribution to face: Touch to turn

on/off.

11. Air distribution to feet: Touch to turn

on/off.

12. Sync climate: Select to change all front and

rear passenger climate settings to match
that of the driver’s. Select again or change
a passenger’s settings to cancel.

13. Settings: Select to alter the sensitivity of

the air quality sensor, or to select °C or °F
as the default temperature unit.

14. Front seats: Select to adjust the front seat

temperature, ventilation and massage
settings.

15. Rear climate: Select to view the rear

climate control menu. Select the Back
button to return to the front climate menu.

16. Climate off: Select to switch off the climate

control systems. Select again to turn on.

In addition to the selectable controls, the
climate menu displays symbols that indicate
the status of heating and ventilation functions.

Note: If the climate control system is switched
off, pressing an AUTO button or the Defrost
button, will switch the climate system on.

HEATED SCREENS

With the engine running, the front (F) and rear
(R) screen heaters, may be switched on and off
in any mode, including with the climate control
system off.

The front screen heater switches off
automatically after 5 minutes, the rear screen
heater after 21 minutes.

In cold ambient conditions, the screen heaters
will switch on automatically when the engine is
started. The screen heaters will also activate
automatically at temperatures below 5°C
(41°F).

RECIRCULATION

• Press briefly to activate timed

recirculation. The button indicator
illuminates when recirculation is on.

• Press and hold the button to activate

latched recirculation. The button indicator
will flash and then illuminate constantly.

• To cancel recirculation, press the button

briefly.

When selected, the air is recirculated inside the
vehicle. This helps to maintain a high or low
temperature, and is useful for preventing
fumes from entering the vehicle.

Timed recirculation: Recirculation will switch
off automatically after a set time (dependent on
the ambient temperature).

Latched recirculation: Recirculation will
remain on until the button is pressed again.

Note: Prolonged use at low temperatures may
cause the windows to mist.

Recirculation may also be selected in AUTO
mode, if the climate control system detects
high levels of pollution in the atmosphere
outside the vehicle (if an air quality sensor is
fitted). Manual operation of the recirculation
control will override the automatic setting.

AIR QUALITY SENSOR

If the air quality sensor detects pollution, air
recirculation is selected automatically to
reduce pollutants entering the vehicle.

The sensitivity of the sensor can be adjusted
using the touch screen:

1. Select Settings from the Climate menu.

Advertising