Booster cushions, Installing tether anchorage child restraints, Isofix anchor points (not australia) – Jaguar XJ User Manual

Page 28: Occupant safety

Advertising
background image

L

(FM8)

SEMCON JLR OWNER GUIDE VER 1.00

EURO

LANGUAGE: english-en;

MARQUE: jaguar;

MODEL: XJ

Occupant safety

28

* Jaguar recommend that the front passenger
seat be positioned fully rearward, with the
cushion adjusted to the highest position when
installing child restraints.

Note: Ages given are approximate. In case of
doubt, the child’s weight, not age, should be
used when considering an appropriate child
seat.

BOOSTER CUSHIONS

In a situation where a child is too large to fit
into a child safety seat, but is still too small to
safely fit the three point belt properly, a booster
seat is recommended for maximum safety.
Follow the manufacturer's instructions for
fitting and use, then adjust the seat belt to suit.

INSTALLING TETHER ANCHORAGE
CHILD RESTRAINTS

1. Install the child restraint securely in one of

the rear seating positions.

2. Pass the tether strap over the seat back and

beneath the head restraint.

3. Attach the tether strap hook to the tether

anchor point on the back of the seat.
Ensure that the tether strap hook is facing
the correct way. See 22, USING SEAT
BELTS AND CHILD SAFETY LOCKS
.

4. Tighten the tether strap according to the

manufacturer's instructions.

ISOFIX ANCHOR POINTS (not
Australia)

Do not attempt to fit ISOFIX restraints
to the centre rear seating position.
The anchor bars are not designed to
hold an ISOFIX restraint in this
position.

If the restraint is not correctly
anchored, there is a significant risk of
injury to the child in the event of a
collision or emergency braking.

Child restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted child
restraints. Under no circumstances
are they to be used for adult seat
belts, harnesses or for attaching other
items or equipment to the vehicle.

If removing the centre head restraint
in order to fit a child restraint, always
secure the head restraint when storing
it.

Both of the outer rear seat positions are
equipped to accept ISOFIX restraints.

This symbol is shown on a label
sewn into the seats to indicate the
position of the ISOFIX lower
anchorages.

Advertising