Jwin JX-CD492 - Manual (Page 10)

PROGRAMMED PLAYBACK
Reviewing programs
Press the PROGRAM button (21) or (27)
repeatedly. The track number programmed on
each program number will be displayed.
This CD player enables you to program up to 20 tracks in the sequence of your choice. First select CD stop
mode.
1. Press the PROGRAM button (21) or (27) one
time. (“MEMORY” flashes)
3. Press the PROGRAM button (21) or (27) one
time, then the selected track, e.g., track 4 is
stored.
2. Press the SKIP Forward or Backward button
(14)/(17) or (30)/(31) to select the desired track
to be programmed.
4. Continue to program, repeat steps 2 and 3 for
each selection.
Press PLAY/PAUSE button (18) or (28) to play
the programmed tracks. 5.
9
Choose track 4
Clear the program
Press the PROGRAM button (21) or (27) to recall
previously programmed track (“MEMORY” icon
flashes), then press CD stop button to cancel the
preset programs or change function mode or open
the CD door.
PROGRAM
OR
SKIP/
TUN DN
SKIP/
TUN UP
PROGRAM
When program is full