Jwin JX-CD492 - Manual (Page 13)

4. Press the PROG./MEM. button again, then track
4 of folder 3 is stored.
12
PROGRAM
Playing track 4 of folder 3
5. Continue to program, repeat steps 2 to 4 for
each selection.
Reviewing programs
Press the PROG./MEM. button (21) or (27)
repeatedly. The track number programmed on
each program number will be displayed.
6. Press the PLAY/PAUSE button (18) or (28) to
play the programmed tracks.
When Program is full
Note: Press the PROG./MEM. Button (if
programmed tracks still exist) then PLAY/
PAUSE button, the program play will start
again.
Clear the program
Press the PROGRAM button (21) or (27) to recall
previously programmed track (“MEMORY” icon
flashes), then press CD stop button to cancel the
preset programs or change function mode or open
the CD door.