Jwin JX-CD492 User Manual
Page 11
PLAYING MP3 DISCS
If there is no disc inside or disc damaged, a
"- - -" display will be appear.
When there is no disc
1.
2.
Loading a disc
Lift up the CD door lid (6) to open the CD door.
Put a disc inside and then close the CD door.
After that, reading TOC will start.
After reading TOC
To play the disc
1. Press the FOLDER UP or DN button (20)/(12)
or (26) to select desired folder. Total tracks of
select folder will then be shown.
2. Press CD SKIP / buttons (14)/(17)
or (30)/(31) to select desired track.
3. Press the PLAY/PAUSE button (18) or (28) to
start playing.
10
1.
2.
Note: This unit is CD-R / -RW compatible.
Note: Ensure the disc is pushed fully and
locked in place.
Set the FUNCTION selector (8) to CD mode
TAPE CD
(CD / RADIO OFF)
RADIO
To pause the CD
Press the PLAY/PAUSE button (18) or (28) while
the disc is playing. Press it again to resume playing.
While paused
Folder 2 selected
Tracks of folder 2
Folder 2 track 3 selected
Playing track 3 of folder 2
OR
SKIP/
TUN DN
SKIP/
TUN UP
PLAY/PAUSE
PLAY/PAUSE