Jwin JX-CD492 - Manual (Page 7)

6
Manual Tuning - Press and hold the TUNING
UP or DOWN buttons (14)/(17) or (30)/(31) until
the display approaches your desired station.
Then tap the buttons repeatedly until the
display shows the exact frequency.
Auto tuning - Press the TUNING forward or
backward buttons momentarily and release.
The tuner will move up or down to the next
available station.
Set the FUNCTION selector (8) to RADIO mode 1.
2. Press the BAND button (13) or (32) for AM or
FM band.
3. Press the TUNING Up or Down button (14)/(17)
or (30)/(31) to tune to the desired station.
LISTENING TO THE RADIO
Example : FM mode
4. When finished listening, slide the FUNCTION
selector (8) to TAPE (RADIO/CD OFF) position.
1.
STORING PRESET STATIONS
The unit enables you to program 10 stations of FM
and 10 stations of AM band.
2. Press the PROGRAM button (21) or (27) once.
(“MEMORY” flashing)
4. Press the PROGRAM button (21) or (27) again.
The station is stored. (“MEMORY” steady on)
Tune to the station you wish to store by
pressing TUNING UP or DOWN button (14)/
(17) or (30)/(31)
3. Press the FOLDER/M-UP or FLDER-DN button
(20)/(12) or (26) repeatedly to set the desired
preset station number. (“MEMORY” still
flashing)
5. To store other stations, repeat above steps.
RECALLING PRESET STATION
Press the FOLDER/M-UP or FOLDER/M-DN
(20)/(12) or (26) button on main unit or remote
control repeatedly to select the desired station.
TAPE CD (CD / RADIO OFF)
RADIO
OR
OR
SKIP/
TUN DN
SKIP/
TUN UP
SKIP/
TUN DN
SKIP/
TUN UP