Jwin JX-CD492 - Manual (Page 8)

PLAYING COMPACT DISCS
If there is no CD inside or disc damaged, a
"- - -" display will be appear.
When there is no disc
1.
2.
Loading a disc
Lift the CD door lid (6) to open the CD door.
Put a disc inside and then close the CD door.
After that, reading TOC will start.
After reading TOC
To play the disc
Press the PLAY/PAUSE button (18) or (28) to play
the CD.
Playing track 1
To pause the CD
Press the PLAY/PAUSE button while the disc is
playing. Press it again to resume playing.
While paused
To stop the disc
Press the STOP button (13) or (32).
Stop condition (TOC display)
7
1.
2.
Note: This unit is CD-R / -RW compatible.
Note: Ensure the disc is pushed fully and
locked in place.
Set the FUNCTION selector (8) to CD mode
TAPE CD (CD / RADIO OFF)
RADIO
PLAY/PAUSE
PLAY/PAUSE
STOP/BAND