John Deere POWERTECH 4045 User Manual

Page 147

Advertising
background image

Lubrication & Maintenance/500 Hour/12 Month

OURGP11,000008C

–19–27JUL06–2/4

3. Drain crankcase oil from engine while warm.

NOTE: Drain plug location may vary, depending on the

application.

OURGP11,000008C

–19–27JUL06–3/4

RG11616

UN–24OCT01

Oil Filter And Mounting Header

RG11617

–UN–24OCT01

Oil Filter Seals

RG11618

–UN–24OCT01

Filter And Mounting Header

A—Oil Filter Element
B—Inner Seal
C—Outer Seal
D—Sealing Surface On Header
E—Sealing Surface On Header
F—Dust Seal

4. Turn filter element (A) using a suitable filter wrench to

remove. Discard oil filter element.

NOTE: Depending on engine application, oil filter may be

located on either side of the engine in a high- or
low-mount location.

IMPORTANT: Filtration of oils is critical to proper

lubrication. Always change filter
regularly. Use filter meeting John Deere
performance specifications.

5. Apply clean engine oil to the new filter at the inner (B)

and outer (C) seals and to filter threads.

6. Wipe both sealing surfaces of the header (D, E) with a

clean rag. Ensure notches in dust seal (F) are properly
installed in the slots in the housing. Replace dust seal
if damaged.

IMPORTANT: When installing filter element, HAND

TIGHTEN only. A filter wrench may be
used for REMOVAL ONLY. Be sure
notches in dust seal (F) are properly
installed in the slots in the housing.

7. Install and tighten oil filter by hand until firmly against

dust seal (F). DO NOT apply an extra 3/4 to 1-1/4 turn
after gasket contact as done with standard filters.

8. Tighten drain plug to specifications.

Specification

Oil Pan Drain Plug With Copper
Washer—Torque

70 N•m (52 lb ft)

.............................................................

Oil Pan Drain Plug With O-Ring—
Torque

50 N•m (37 lb ft)

.............................................................................

Oil Pan Drain Plug With Packing
(6068 Engine Code 1961, Steel
Oil Pan)—Torque

40 N•m (29 lb ft)

.............................................................

30-8

080706

PN=145

Continued on next page

Advertising
This manual is related to the following products: