John Deere POWERTECH 4045 - Manual (Page 120)

Engine Operation- 4.5 L “270” Engines
OURGP11,0000169 –19–27JUL06–3/3
RG11616
–UN–24OCT01
Engine Oil Filter
5. Change engine oil and oil filter after the first 100 hours
of use. After break-in period, change oil and filter every
500 hours/12 months. (See CHANGE ENGINE OIL
AND FILTER in Lubrication and Maintenance/500 Hour
Section.) Fill crankcase with seasonal viscosity grade
oil. (See DIESEL ENGINE OIL, in Fuels, Lubricants,
and Coolant Section.)
IMPORTANT: DO NOT operate engine when oil level
is below ADD mark on dipstick. Check
oil level before starting engine for the
first time.
RG,RG34710,5555 –19–27JUL06–1/1
Auxiliary Gear Drive Limitations
RG7634A
–UN–22JAN99
Auxiliary Gear Drive
A—Auxiliary Gear Drive
IMPORTANT: When attaching an air compressor,
hydraulic pump, or other accessory to
be driven by the auxiliary gear drive (A)
(engine timing gear train at front of
engine), power requirements of the
accessory must be limited to values
listed below:
•
30 kW (40 hp) Continuous Operation at 2500 rpm
•
37 kW (50 hp) Intermittent Operation at 2500 rpm
20-3
080706
PN=118