John Deere POWERTECH 4045 - Manual (Page 51)

Instrument Panel - Elect. Cont. Earlier Engines
OURGP11,000027A –19–07AUG06–3/7
RG11169
–UN–01NOV00
Instrument Panel For Earlier Engines
Touch Switches
The touch switches are used to change the display on the
window of the diagnostic gauge to access engine
performance data. Pressing the DOWN switch (E) or UP
switch (F) scrolls through various engine parameters and
diagnostic trouble codes. (See Using Diagnostic Gauge
To Access Engine Information on the following pages for
instructions.)
Audible Alarm (Optional)
The audible alarm (G) sounds whenever a low oil
pressure, high coolant temperature or
water-in-fuel/plugged fuel filter condition exists. This
includes all signals that light up the amber “WARNING”
indicator (B) or the red “STOP ENGINE” indicator (C).
Audible Alarm Override Switch (Optional)
The audible alarm override switch (H) can be pressed to
silence the alarm for approximately 2-1/2 minutes.
Analog Throttle Control (Optional)
The throttle control (I) is used to control engine speed.
This control is available only on engines with analog
throttle.
Dimmer Control (Optional)
The dimmer control (J) is used to control illumination of
the instrument panel gauges.
Continued on next page
16-3
080706
PN=49