John Deere POWERTECH 4045 - Manual (Page 56)

Instrument Panel - Elect. Cont. Earlier Engines
OURGP11,0000072 –19–27JUL06–1/2
Using Diagnostic Gauge to Access Engine
Information
RG10031
–UN–28OCT99
Diagnostic Gauge (Earlier Engines)
A—Diagnostic Gauge
B—Touch Switches
C—Lights
The diagnostic gauge (A) allows the operator to view
many readouts of engine functions and diagnostic trouble
codes (DTCs). The gauge is linked to the electronic
control system and its sensors. This allows the operator to
monitor engine functions and to troubleshoot the engine
systems when needed.
Press the two touch switches (B) to view the various
engine functions in sequence. The displays can be
selected as either customary English or metric units.
NOTE: Engine parameters which can be accessed will
vary with the engine application.
The following menu of engine parameters can be
displayed on the diagnostic gauge window:
•
Accelerator pedal position
•
Percentage load @ current speed
•
Actual engine percent torque
•
Engine speed
•
Trip distance
•
Total vehicle distance
•
Engine hours
•
Trip fuel
•
Total fuel used
•
Coolant temperature
•
Fuel temperature
•
Engine oil temperature
•
Engine intercooler temperature
•
Fuel delivery pressure
•
Engine oil level
•
Engine oil pressure
•
Coolant pressure
•
Coolant level
•
Wheel base vehicle speed
•
Fuel rate
•
Barometric pressure
•
Air inlet temperature
•
Boost pressure
•
Intake manifold temperature
•
Air filter differential pressure
•
Exhaust gas temperature
16-8
080706
PN=54
Continued on next page