JVC HR-DD840KR - Manual (Page 15)

EN
15
Set Cable Box Brand
TURN ON CABLE BOX
1
Select a channel other than channel 9 on your Cable
Box.
ACCESS CABLE BOX
BRAND SET SCREEN
2
At the G-C ODE Set-Up
screen, press CH 5∞ or
PUSH JOG 5∞ to move
the highlight bar (arrow) to
“CABLE BOX BRAND
SET”, then press OK.
ENTER CABLE BOX BRAND
3
Press the appropriate
NUMBER keys to enter the
Cable Box Code from the
CABLE BOX BRAND LIST
to the right, then press OK.
● If the cable box’s
channel changes to 9,
setting is complete.
● If there are more than one code number listed for
your brand of cable box, repeat step 3 until the cable
box’s channel changes to 9.
● If the code numbers for your model of cable box is
not listed the channel may not change even if you go
through all the listed numbers. If this occurs try all
other numbers between 1 and 69.
RETURN TO NORMAL
SCREEN
4
Press MENU as many times as necessary.
You can now set up the G-C ODE feature (
੬
pg. 16).
NOTES:
● Although the supplied Controller is compatible with many
different cable box brands, it is possible that it will not work
with your cable box.
● If your cable box doesn’t respond to any code between 1 and 69,
you can’t use the Controller to change cable box channels. In this
case, make sure to leave the cable box turned on and tuned to the
proper channel before the scheduled start of timer recording.
Please contact your cable company about the possibility of
exchanging your current cable box with one that is compat-
ible with your VCR.
● The VCR can only change the cable box channel through the
Controller during timer recording.
● If your cable box is one that can’t be operated with a remote
control (because it has no remote sensor), you can’t use the
Controller to change its channels. Make sure to leave the
cable box turned on and tuned to the proper channel before
the scheduled start of timer recording.
CABLE BOX BRAND LIST
BRAND CODE
ZENITH 11, 12, 60, 61
DEREUNG 10
G-CODE SET-UP
GUIDE CHANNEL SET
GUIDE CHANNEL MAP
CABLE BOX OUTPUT
=CABLE BOX BRAND SET
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
CABLE BOX BRAND SET
1
PRESS NUMBER KEY (0-9)
THEN (OK)
PRESS (MENU) TO END