JVC HR-DD840KR - Manual (Page 48)

48
EN
q
EDITING (cont.)
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s VIDEO
OUT and AUDIO OUT connectors and your VCR’s
VIDEO IN and AUDIO IN connectors.
● When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
● If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Press NUMBER key “0” to set to AUX.
ACCESS MAIN MENU
SCREEN
4
Press MENU as many times as necessary.
ACCESS FUNCTION SET
SCREEN
5
Press CH 5∞ or PUSH JOG 5∞ to move the highlight
bar (arrow) to “FUNCTION SET”, then press OK.
If you’re using a JVC Master Edit Control-equipped
camcorder — step 6
If not — step 9
ACCESS SPECIAL
FUNCTION SCREEN
6
Press CH 5∞ or PUSH JOG 5∞ to move the highlight
bar (arrow) to “SPECIAL FUNCTION”, then press OK.
SELECT MODE
7
Press CH 5∞ or PUSH
JOG 5∞ to move the
highlight bar (arrow) to
“PAUSE”.
Mini-plug cable (not supplied)
(JVC camcorder only)
Recorder Your VCR
To rear panel PAUSE/
SPECIAL FUNCTION connector
Player
AUDIO OUT
SPECIAL FUNCTION
=PAUSE
AV COMPU-LINK
PRESS ( 5,∞) TO SELECT
PRESS (MENU) TO END
VIDEO
IN
AUDIO IN
Audio/Video cable
(supplied)
EDIT
1 2
4 5
3
6
8
0
7 9
VIDEO OUT
Camcorder
CH
NUMBER "0"
MENU
OK
PUSH JOG