JVC GR-AXM77UM - Manual (Page 5)

EN
5
2
1
3
3 4
2
1 Using the battery pack
1
Hook-on the battery pack’s top end to the
camcorder. (Charging procedure,
੬
pg. 8)
2 Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
QUICK OPERATION GUIDE
1 Set the Power Switch to “PLAY”.
2 Press REW.
— The tape will automatically stop at the
beginning of the tape.
3 Press PLAY/PAUSE.
— Playback starts and the playback picture
appears.
•To stop playback, press STOP.
(For more details,
੬
pg. 38.)
•The viewfinder switches off automatically to
save power when the LCD monitor is
opened at an angle of over 45 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
Or simply play back the tape on a VHS
VCR using the Cassette Adapter (VHS
Playpak).
੬
pg. 41
1
Slide the LENS COVER Open/Close Switch
to open the lens cover.
2
Set the Power Switch to “CAMERA”.
— The power indicator will light and an
image will appear.
3 Press the Recording Start/Stop Button.
— Recording starts.
• To stop recording temporarily, momentarily
press the Recording Start/Stop Button once
again.
(For more details,
੬
pgs. 16 – 19)
• The viewfinder switches off automatically to
save power when the LCD monitor is
opened at an angle of over 45 degrees.
• The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
SUPPLY POWER INSERTING A VIDEO
CASSETTE
PLAYBACK
SHOOTING
1 Open the LCD monitor to an angle of over
45 degrees.
2 Press EJECT to open the cassette holder.
3 Insert a video cassette.
4 Press PUSH to close the cassette holder.
(For more details,
੬
pg. 13)
2
1
BATT. RELEASE
3
2
1
Hook on.
PLAY/PAUSE
STOP
Push in.
Recording
Start/Stop Button
Set to
“CAMERA”
Set to “PLAY”
REW
EJECT PUSH
Open
LENS COVER
Open/Close Switch