Getting started, Power, Supply power – JVC GR-AXM77UM User Manual

Page 8: Attach battery pack, Detach battery pack, Attention

Advertising
background image

8

EN

GETTING STARTED

Power

This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.

NOTES:

● No function is available without power supply.

● Use only specified power supply.

● Do not use provided power supply units with other

equipment.

CHARGING THE BATTERY PACK

SUPPLY POWER

1

Connect the charger’s AC power cord to a wall
outlet.

ATTACH BATTERY PACK

2

Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.

•The CHG. indicator begins blinking to indicate

charging has started.

DETACH BATTERY PACK

3

When the CHG. indicator stops blinking but stays lit,
charging is finished. Slide the battery pack opposite
the direction of the arrow.

Approximate recording time (unit: min.)

USING THE BATTERY PACK

ATTACH BATTERY PACK

1

Hook its top end to the camcorder and push the
battery pack in until it locks in place.

DETACH BATTERY PACK

2

Slide BATT. RELEASE and pull out the battery pack.

BATT. PACK

CHARGE

DISCHARGE

BN-V12U

approx. 1 hr. 10 min.

approx. 3 hrs. 30 min.

BN-V18U

approx. 1 hr. 40 min.

approx. 5 hrs. 30 min.

BN-V22U

approx. 2 hrs. 10 min. approx. 7 hrs.

BN-V25U

approx. 2 hrs. 40 min. approx. 10 hrs.

LCD

LCD

LCD

BATT.

monitor on/

monitor off/

monitor on/

PACK

Viewfinder off Viewfinder on Viewfinder on

BN-V12U

55 (35)

60 (35)

50 (35)

BN-V18U

90 (60)

95 (60)

80 (55)

BN-V22U

120 (80)

130 (80)

105 (70)

BN-V25U

160 (105)

170 (110)

140 (100)

ATTENTION:

Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.

REFRESH

The AC power adapter features a REFRESH
function that allows you to fully discharge
the battery pack before recharging.
Perform the REFRESH function after no less
than 5 chargings.
To discharge the battery . . .

..... attach the battery pack to the adapter

as shown in the above illustration.
Then push REFRESH. The REFRESH
indicator lights when discharging
starts, and goes out when discharging
is complete.

CHG. (charge)
indicator

Marks

To AC outlet

Hook on.

Push in.

BATT. RELEASE

REFRESH indicator

REFRESH switch

( ) : when the video light is on.

1

1

2

Advertising