Jenn-Air DUAL-FUEL SLIDE-IN RANGE - Manual (Page 13)

12
TO CHANGE FACTORY SET
DEFAULT OPTIONS:
1. Press the Setup Options (0) pad and
the desired option pad. (See Options
below.)
2. Current option will appear in the dis-
play.
3. Press the Auto Set pad to change the
option.
4. Press any function pad other than the
Cancel pad to set the displayed option
and exit the program.
O
PTIONS
A
VAILABLE
:
E
ND
-
OF
-T
IMER
S
IGNAL
(T
IMER
1 & T
IMER
2)
There are three choices for the end of
"timer" reminder signals.
• Two chimes (Timer 1) or four chimes
(Timer 2) followed by one chime every
30 seconds for up to five minutes (default
setting).
• Two chimes (Timer 1) or four chimes
(Timer 2) followed by one chime every
minute for up to 30 minutes.
• Two chimes (Timer 1) or four chimes
(Timer 2) followed by no other chimes.
NOTE: The reminder signal chosen will
apply to both timers.
C
ONTROL
L
OCK
(1)
The function pads on the control can
be locked to prevent unwanted use
for safety and cleaning benefits.
Control Lock will not lock out the Timer,
Clock or Oven Light.
12 H
OUR
O
FF
/S
ABBATH
M
ODE
(2)
The oven may be set to turn off after
12 hours or stay on indefinitely. The
default is set to turn off after 12 hours.
S
OUND
L
EVEL
(3)
The sound of the chimes may be
changed with IIIIIIII(8) being the high-
est volume and I(1) being the lowest.
The default is set at level 6.
12/24 H
OUR
C
LOCK
(4)
The clock may be set for a 12-hour or
24-hour clock. The default is set for a 12-
hour clock.
S
CROLL
S
PEED
(5)
The scroll speed of the messages in
the display may be changed from
FAST to MEDIUM to SLOW. The
default is set for the medium speed.
E
ND
-
OF
-C
OOK
T
IME
S
IGNAL
(6)
There are three choices for the end of
"clock controlled cooking" reminder
signals.
• Three chimes followed by two chimes
every minute for up to 30 minutes (de-
fault setting).
• Three chimes followed by no other
chimes.
• Three chimes followed by two chimes
every 30 seconds for up to five minutes.
T
EMP
C/F (7)
The temperature scale may be
changed to Centigrade or Fahren-
heit. The default is set for Fahrenheit.
L
ANGUAGE
(8)
The words which scroll in the display may
be changed from English to French or Span-
ish.
D
EFAULT
(9)
The control can be reset to restore the
factory setting for each option.
D
ISPLAY
O
N
/O
FF
(C
LOCK
)
The time-of-day display may be shut off
when the oven is not in a cooking or
cleaning function.
O
VEN
T
EMPERATURE
A
DJUSTMENT
If you think the oven is operating too cold
or hot, you can adjust it. Bake several test
items and then adjust the temperature
setting not more than 10
°
F at a time.
TO ADJUST:
1. Press the Bake pad and enter 550
°
F.
2. Press and hold the Bake pad for several
seconds until TEMP ADJ is displayed.
3. Press the Auto Set pad - each press
changes the temperature by 5
°
F. The
control will accept changes from -35
°
to
+35
°
F.
4. If the oven was previously adjusted, the
change will be displayed. For example,
if the oven temperature was reduced by
15
°
F, the display will show -15
°
F.
5. When you have made the adjustment,
press any function pad, OPTION
CHANGED will scroll and the time of
day will reappear in the display. The
oven will now bake at the adjusted
temperature.
NOTE: It is not recommended to
change the oven temperature if only
one or two recipes are in question.
O
VEN
L
IGHT
The oven light automatically comes on
when the door is opened. When the door
is closed, press the Oven Light pad on the
control panel to turn the light on or off.
The oven light will come on automatically
one minute before the end of a clock
controlled cooking operation.
C
ONTROL
O
PTIONS
O
VEN
C
OOKING ,
CONT
.