Jenn-Air DUAL-FUEL SLIDE-IN RANGE - Manual (Page 8)

7
2.Press again for 350
°
F or press the Auto
Set pad. Each additional press of Auto
Set will raise the temperature 25
°
F. Or,
press the appropriate number pads for
the desired temperature between 100
°
F
and 550
°
F.
3.When the oven turns on, a red preheat
indicator will light and the bake icon will
be displayed.
4.A single chime will indicate the oven is
preheated to the set temperature. The
preheat indicator will turn off.
5.When cooking is complete, press Cancel
pad. Remove food from oven.
C
ONVECT
B
AKE
P
AD
/
C
ONVECT
R
OAST
P
AD
(
SELECT MODELS
)
1. Press Convect Bake or Convect Roast
pad.
2. Press again for 325
°
F or press the Auto
Set pad. Each additional press of Auto
Set will raise the temperature 25
°
F. Or,
press the appropriate number pads for
the desired temperature between 100
°
F
and 550
°
F.
3. When the oven turns on, a red preheat
indicator will light and the convect
icon will be displayed.
NOTE: When the oven is set to preheat
for regular baking (either standard or
quick preheat), the convect fan will oper-
ate during the preheat period.When the
oven reaches the selected temperature,
the convect fan will shut off. This is
normal operation.
4. A single chime will indicate the oven is
preheated to the set temperature. The
5. At the end of the set time, “END” will be
displayed and two chimes will sound fol-
lowed by two chimes every 30 seconds
for up to five minutes. Press the corre-
sponding Timer pad to cancel the
chimes.
NOTE: The Timer reminder chimes at
the end of a set time may be changed. See
Control Options (End-of-Timer Signal),
page 12.
To Cancel a Set Time:
Press and hold the corresponding Timer
pad for several seconds. After a slight delay
the time of day will appear.
OR
Press the Timer pad and the “0” number
pad. After a slight delay the timer will be
canceled.
C
ANCEL
P
AD
Use to cancel all programming except the
Clock and Timer functions.
A
UTO
S
ET
P
AD
Use with function pads to automatically set:
• 350
°
F bake temperature
• 325
°
F convect bake or roast temperature
(select models)
• hi or lo broil
• three hours of cleaning time
• 140
°
F drying temperature (select models)
• 160
°
F probe temperature (select models)
• 170
°
F keep warm temperature (select
models)
• quick or standard bread proofing (select
models)
• to change control options
B
AKE
P
AD
Use for baking and roasting.
1.Press Bake pad.
PREHEAT
INDICATOR
BAKE
ICON
BAKING
• To recall the set temperature during
preheat press the Bake pad.
• To change oven temperature during
cooking, press the Bake pad and the
appropriate number pads.
• Allow 10-12 minutes for the oven to
preheat.
• Do not use temperatures below 140
°
F
to keep food warm or below 200
°
F for
cooking. For food safety reasons, lower
temperatures are not recommended.
• For additional baking and roasting tips,
refer to the “Cooking Made Simple”
booklet.
CONVECT BAKING AND
ROASTING (select models)
• Convect Bake function cycles both
the bake and broil elements along with
the convection fan at a low speed.
preheat indicator will turn off.
5. When cooking is complete, press Cancel
pad. Remove food from oven.
NOTES:
• As a general rule, when convec-
tion baking, set the oven tempera-
ture 25
°
F lower than the conven-
tional recipe or prepared mix di-
rections. Baking time will be the
same to a few minutes less than
directions.
Convect Roast function cycles both
the bake and broil elements along with
the convection fan at a high speed.
• When roasting meat using the con-
vection setting, roasting times may
be up to 30% less. (Use conventional
roasting temperatures.)
• See roasting chart in “Cooking Made
Simple” booklet for recommended
roasting temperature and times, and
additional baking and convection cook-
ing tips.
• The convection fan will stop when-
ever the oven door is opened.
O
VEN
C
OOKING ,
CONT
.