John Deere GP-2700GH - Manual (Page 14)

4 Operator’s Manual
Installation
InSTAllATIOn
. Before installation, the brackets must be adjusted for the use of a bedliner.
With Bedliner: Bolts on the pallet need to be at the top of the bracket
slots. (Fig. )
Without Bedliner: Bolts on the pallet need to be at the bottom of the bracket
slots. (Fig. )
WARnInG: neveR ATTemPT TO lIfT THe GATORPAl by
yOuRSelf; A fORK lIfT OR HOIST IS RequIRed
TO lIfT THe SySTem.
. Engage park brake before installing the GatorPal.
. Water tank must be empty before installation.
4. Place the GatorPal into the center of unit’s box and line up the hole placements.
(Fig. )
- When lifting with a forklift, use the forklift holes in the pallet of the GatorPal.
(Fig. 4)
- When using a hoist, make sure to securely fasten the straps to the unit before
lifting. (Fig. 5)
CAuTIOn: AvOId PInCHed fInGeRS OR HAndS WHen
ASSemblInG THe GATORPAl OnTO THe unIT.
5. Using the anchors, bolts and washers that are supplied with the GatorPal,
attach the GatorPal to the box. Tighten all bolts. (Fig. 6)
Fig. 4 Fig. 5 Fig. 6
Fig. 
Fig.  Fig. 
GATORPAl mOdelS
GP-2700GH/GS GP-3000GH/GS
GATOR mOdelS 100 ft. Hose 100 ft. Hose
GATOR TS X
GATOR TH 6x4 X
GATOR HPX 4x4 X
GATOR HPX 4x4 DIESEL X
TRAIL GATOR HPX 4x4 X
GATOR 6x4 DIESEL X
M-GATOR UTILITY VEHICLE X
APPlICATIOn CHART
NOTE: Only install GatorPal on Gator in accordance with Application Chart below.