John Deere GP-2700GH - Manual (Page 2)

 Operator’s Manual
THANK YOU for purchasing a John Deere product.
READ THIS MANUAL carefully to learn how to operate
and service your machine correctly. Failure to do so
could result in personal injury or equipment damage.
This manual and safety signs on your machine may
also be available in other languages. (See your John
Deere dealer to order.)
THIS MANUAL SHOULD BE CONSIDERED a
permanent part of your machine and should remain
with the machine when you sell it.
MEASUREMENTS in this manual are given in both
metric and customary U.S. unit equivalents. Use only
correct replacement parts and fasteners. Metric and
inch fasteners may require a specific metric or inch
wrench.
WRITE SERIAL NUMBER in the Specification or
Identification Numbers section. Accurately record all
the numbers to help in tracing the machine should it be
stolen. Your dealer also needs these numbers when
you order parts. File the identification numbers in a
secure place off the machine.
WARRANTY is provided from your John Deere dealer
for customers who operate and maintain their equipment
as described in this manual. The warranty is explained
on the warranty certificate shown in this manual.
This warranty provides you the assurance that your John
Deere dealer will back products where defects appear
within the warranty period. Should the equipment be
abused, or modified to change its performance beyond
the original factory specifications, the warranty will
become void. Setting fuel delivery above specifications
or otherwise overpowering the machine will result in
such action.
Introduction