Jwin JD-VD903 - Manual (Page 23)

22
3-2 Video Setup
-continued
Cable/Antenna Setting
This function determines how your TV is hooked up, either by Cable or Antenna.
1
Press
SETUP in the stop mode.
2
Press / to select “Video Setup” and press .
3
Press / to select “Cable/Antenna” then press .
4
Press / to select “Cable” or “Antenna”.
5
Press .
To return to the SETUP MENU screen
Press button.
To finish the setup operation
Press SETUP to exit from SETUP MENU screen.
VIDEO OUTPUT Setting
Please choose the preferred video output according to the output format.
1
Press
SETUP in the stop mode.
2
Press / to select “Video Setup” and press .
3
Press / to select “Video Output” then press .
4
Press / to select the preferred video output setting.
5
Press .
To return to the SETUP MENU screen
Press button.
To finish the setup operation
Press SETUP to exit from SETUP MENU screen.
NOTE:
If you want to connect this DVD Recorder to Progressive Scan TV, you have to select “Component” in the video
output setting.
3 Initial Settings