Jwin JD-VD903 - Manual (Page 25)

24
3-4 System Info Setup
DATE AND TIME Setting
If this DVD Recorder sets the date and time incorrectly, you could set the information manually.
1
Press
SETUP in the stop mode.
2
Press / to select “System Info” and press .
3
Press / to select “Date and Time”, and then press .
4
Press / to select the preferred item.
Every time you press , you could select the following items in order: hour, minute, second, month, day and year.
5
Press / to adjust the numbers to the exact date and time.
The OSD screen will be as following:
Time 02:16:08
Date 03/26/03 WED
6
Press
to save and return.
7
Press
CLEAR to return without save.
NOTE:
Every time before doing schedule recording, you have to check the date and time setting again to make sure the infor-
mation of the date and time be correct.
To return to the SETUP MENU screen
Press button.
To finish the setup operation
Press SETUP to exit from SETUP MENU screen.
RATINGS Setting [DVD]
A built-in viewer rating setting enables you to lock the videos that you do not want children to view. For example, if you
set it to PG-13 then the player will not play the videos rated R, NC-17 or X unless the correct password is entered.
1
Press
SETUP in the stop mode.
2
Press / to select “System Info” and press .
3
Press / to select “Ratings” and press .
The password input dialog box will appear on the screen.
4
Enter the password then press .
Factory pre-set password :
99999
5
Press / to choose one level from 1 to 8 and press .
To return to the SETUP MENU screen
Press button.
To finish the setup operation
Press SETUP to exit from SETUP MENU screen.
For Your Reference:
" You can use the parental control lock ONLY with DVD video discs featured with the parental lock funcion.
" Some discs may not be encoded with specific rating level information though its disc jacket says that is for “adults”.
For those discs, RATINGS lock will not function.
3 Initial Settings
It will change automatically according to the setup date.