Jwin JD-VD903 - Manual (Page 31)

30
Schedule Setup Setting
1
Press
SETUP in the stop mode.
2
Press / to select “Schedule” then press .
This DVD Recorder provides with up to 8 entires for schedule recording.
3
Press / to select one entry to enter your information and press .
4
Press / or number buttons to choose your freq date.
Example: If you want to record a TV sport show every Friday night; then choose “Wkly Fri”.
5
Press
button to choose “start time”.
6
Press / to choose your start time.
7
Press
button to choose “Duration”.
8
Press / to choose your duration.
9
Press
button to choose “source” you want to record.
10
Press / or number buttons to choose your source.
If you choose to record from TV channel, enter the TV channel number by pressing number buttons.
11
Press
button to choose the “quality” you want your recording to occur.
12
Press / to choose your recording quality.
13
Press
button to choose “ON/OFF” to decide whether you want to do the schedule
recording or not.
14
Press / to confirm to do the schedule recording or not do the schedule
recording.
Example: If you have set this DVD Recorder to record a TV program every Friday night; yet you don’t want to do the
schedule recording this Friday. You could choose “Off” in schedule recording setup setting, then this DVD Recorder
won’t do the schedule recording this Friday. This DVD Recorder only do the schedule recording until you choose “On”
in schedule recording setup setting.
15
Press
button to store your schedule setting if all the information is correct.
Check your schedule setting. If something is incorrect, press button to choose the item for correction.
Important:
After finishing the schedule setting, a warning message “Press power button for timer recording” will show on the
screen. You have to press the
POWER on the remote control to power stand-by mode. Only by doing this, the
schedule recording setup has completed.
NOTE:
"
Make sure Date and Time of this DVD Recorder be the same as real time.If not, check SYSTEM INFO setup menu to
correct it.
" While schedule recording, make sure POWER of this DVD Recorder always on.
" Before schedule recording, remember to put a recordable DVD+RW or DVD+R (with free space) into this DVD Re-
corder. If not, you can’t do any recording even though schedule recording has setup.
To return to the SETUP MENU screen
Press button.
To finish the setup operation
Press SETUP to exit from SETUP MENU screen.
4-2 Record Setup
-continued
4 Recording Functions