JVC XR-D400SL - Manual (Page 15)

Playback operations
Playback operations
11
XR-D400 [E] EN
LET0169-001A
English
To insert a disc
1 Open the loading tray by pressing
0 OPEN/CLOSE.
2 Place the disc into the loading tray.
Make sure the disc edge does not overlap
the edge of the recessed area.
3 Close the loading tray by pressing
0 OPEN/CLOSE.
You can check the track information by
viewing the TRACK indicator.
To remove a disc
1 Open the loading tray by pressing
0 OPEN/CLOSE.
2 Remove the disc from the loading tray.
3 Close the loading tray by pressing
0 OPEN/CLOSE.
NOTES
• Never pull on the loading tray when it is in the open position.
• Always keep the loading tray in the closed position except when inserting or removing a
disc.
• Do not insert a disc to the loading tray for SOURCE. The unit cannot play a disc that is
inserted into the loading tray for SOURCE.
• When you insert an improper disc, the disc is ejected. Make sure that a disc is proper
before inserting.
OPEN/CLOSE
Insert a disc into the loading
tray for REC/PLAY.
PO WER
1
11
2
12
3
13
4
14
5
15
6
16
1 TRA CK ALL
ERASE
OVER
OPEN/CLOSE
SOURCE
SPEED
REPEA T
FINALIZE PR OGRAM
REC 4x 2x 1x
7
17
8
18
9
19
10
20
OPEN/CLOSE
REC/PLA Y
SCSI
AU TO REC