JVC XR-D400SL - Manual (Page 21)

Recording operations
Recording operations
17
XR-D400 [E] EN
LET0169-001A
English
This chapter explains recording operations for using the unit as an audio CD
recorder.
Before operations
Before recording operation, please read “Limitations of recording” and “About
Finalize” carefully to avoid mistakes recording.
Limitations of recording
Use a CD-R or CD-RW disc for audio recording when recording an audio source.
The type of discs that can be recorded are listed below:
• Blank CD-R/CD-RW (The recorded CD-RW disc can be used as a blank disc
when you erase the recorded data.)
• Unfinalized CD-R/CD-RW disc that has space to add a track.
To playback a disc recorded by the unit on your CD player
• Finalize the disc.
• CD-RW discs may not be played on a CD player. CD-RW discs can be
played on a CD-RW recorder or a CD/DVD player with MultiRead logo.
Cautions in digital recording
• When you make digital recording from a commercially available audio CD
to a CD-R/RW disc, only one generation of digital recording can be made
(SCMS). You cannot make digital recording from the recorded CD-R/RW.
• The track that is recorded to a CD-R/RW disc for audio recording cannot
be recorded for 74 minutes from the time that the track is recorded.
About Finalize
“Finalize” is the final process to make the recorded disc possible to play on a CD
player.
• A disc that is finalized cannot be recorded any more. Please make sure
that the recording is finished before finalizing.
• Do not turn off the unit during finalizing. It may damage the disc.
Important note
• It may be unlawful to record or playback copyrighted material without
the consent of the copyright owner.
Recording operations