JVC XR-D400SL - Manual (Page 29)

Using as a CD-R/RW drive
25
Using as a
CD-R/R
W drive
XR-D400 [E] EN
LET0169-001A
English
About the SCSI daisy chain
A total of seven SCSI devices may be connected to a single host computer. Take
caution to ensure that each device is set to a different SCSI device ID number.
The unit is provided with a D-sub 50P half-pitched connector and has a built-in
SCSI terminator. Connect the unit as the last device in the chain and set the
TERMINATION switch to ON.
Setting the SCSI device ID number
Each SCSI device connected to the host computer must be
given a distinct SCSI device ID number. The unit factory
default SCSI ID number is “0,” but you may have to change
this when you connect it to your computer.
To change the SCSI device ID number, use the ID selection
switch.
HOST Computer
(with SCSI connector)
The unit
ID
6 7
0
1 23
4
5
POWER
1
11
2
12
3
13
4
14
5
15
6
16
1 TRACK ALL ERASE
OVER
OPEN/CLOSE SOURCE
SPEED REPEAT FINALIZE PROGRAM REC
4x 2x 1x
7
17
8
18
9
19
10
20
OPEN/CLOSE
REC/PLAY
SCSI AUTO REC
REPEAT SPEED
Information
• For details of the driver software of the unit, see the instruction of the
supplied CD-ROM.
• System supported: Windows 98 (includes 2nd edition), Windows 95,
Windows NT 4.0
• System requirements: Pentium MMX 166, 64 MB RAM equivalent or
(recommended)
higher