John Lewis JLRC101 - Manual (Page 10)

10
Stability chain
The cooker is fitted with a stability device such as a
proprietary stability chain as shown and firmly secured to
the fabric of the building.
Whatever the position, remember to leave enough room
for the cooker to be pulled out for cleaning and service.
The wall behind the cooker between the hotplate and
450mm above, and across the width of the cooker, must be
an incombustible material such as ceramic wall tiles.
This appliance is designed not to project in front of
standard 600mm worktops (excluding handles). To achieve
the best fit the cooker must be pushed against the wall.
As this appliance is very heavy it should be
situated on a suitably hard surface as to
ensure servicing and installation is made
possible with minimal impact on the floor
surface.
MM
MM
MM
MM
IN
MM
IN