Juniper Networks J-series Services Router J2320 - Manual (Page 162)

8. Configure the port settings as follows:
■ Bits per second: 9600
■ Data bits: 8
■ Parity: None
■ Stop bits: 1
■ Flow control: None
9. Power on the router by pressing the power button on the front panel. Verify that
the
POWER LED on the front panel turns green.
The terminal emulation screen on your management device displays the boot
sequence. When the router has finished booting, a login prompt appears.
10. Log in as the user “root”. No password is required at initial connection, but you
must assign a root password before committing any configuration settings.
Figure 69: Connecting to the Console Port on J2320 and J2350 Routers
140 ■ Connecting to a Services Router
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide