Juniper Networks J-series Services Router J2320 - Manual (Page 223)

8. Press and release the power button to power on the router. Verify that the POWER
LED lights steadily.
9. Verify that the Crypto Module is correctly installed by issuing the show chassis
hardware command, as shown in the following example:
user@host> show chassis hardware
user@host> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis JN1092BAEADB J6350
Midplane REV 03 710-014593 NR2489
System IO REV 01 710-016210 NL3304 JX350 System IO
Crypto Module Crypto
Acceleration
Routing Engine REV 08 710-015273 NM4265 RE-J6350-3400
FPC 0 FPC
PIC 0 4x GE Base PIC
FPC 6 REV 00 750-015152 FPC
PIC 0 6x GE SFP uPIM
Xcvr 0 NON-JNPR PC14DP3 SFP-SX
Xcvr 2 NON-JNPR PC21M3E SFP-SX
Power Supply 0
If Crypto Module appears in the output, the Crypto Accelerator Module is installed
correctly.
Replacing Crypto Accelerator Modules on J4350 and J6350 Routers
The Crypto Accelerator Module is a processor card that enhances performance of
cryptographic algorithms used in IP security (IPSec) services. The Crypto Module is
a standard feature on J6350 Services Routers and an optional feature on the J4350
Services Routers.
Figure 98 on page 202 shows the location of the Crypto Accelerator Module.
Replacing Crypto Accelerator Modules on J4350 and J6350 Routers ■ 201
Chapter 10: Replacing Hardware Components