Juniper Networks J-series Services Router J2320 - Manual (Page 202)

Figure 79: Removing the J2320 or J2350 Internal Compact Flash
9. Place the compact flash on the antistatic mat or in the electrostatic bag.
10. With the vendor name and memory size facing up and the arrow pointing towards
the router, insert the new compact flash into the compact flash slot (see
Figure 80 on page 180).
Figure 80: Inserting the J2320 or J2350 Internal Compact Flash
11. Replace the compact flash slot cover.
12. Tighten the pan head screws that secure the compact flash slot cover.
13. Slide the chassis cover onto the chassis.
14. Replace the chassis cover. (See “Removing and Replacing the Chassis Cover on
J2320 and J2350 Routers” on page 176.)
15. Replace the power cable.
16. Press and release the power button to power on the router. Verify that the POWER
LED lights steadily.
180 ■ Replacing Internal Compact Flashes on J2320 and J2350 Routers
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide