JVC SR-VDA300U - Manual (Page 45)

EN
45
Recording
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
Turn on the VCR and the TV, and select the AV
mode on the TV.
1 Load a D-VHS cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before
inserting the cassette.
● The D-VHS indicator lights on the front display
panel and the PRO HD recording mode is
selected automatically.
2 Start recording
On the front panel:
Press REC (
¶ ).
On the Remote:
While holding REC (
¶ ), press PLAY ( 3 ).
● The ASI-REC indicator lights changes to orange.
● Recording speed is AUTO mode.
AUTO mode: The recording speed will be
selected automatically according
to the amount of data input.
To stop playback
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 )
on the front panel.
To rewind the tape (when it is not running)
Press REW ( 1 ).
To fast-forward (when it is not running)
Press FF ( ¡ ).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the
tape is not running.
● You can also eject the cassette when the VCR is turned
off.
To turn off the VCR
Press POWER.
S-VIDEO VIDEO
MENU
(MONO) L R AUDIO
REC LINC
POWER
IN F-1
TIMER STOP/EJECT
HS /STD/LS3
SP/EP
PLAY
REC PAUSE
PRO HD REW FF
3DNR
CH
S-ET
DIGITAL 3-D NR
S-VHS ET
ASI-IN ASI-REC
POWER
PULL-OPEN
1
POWER
POWER
2
STOP/EJECT ( 7 / 0 )
ASI-REC
indicator
1 2 3
4 5 6
7 8 9
0
VCR TV CABLE/DBS
STOP ( 7 )
FF ( ¡ )
REW ( 1 )
2
POWER
PAUSE ( 8 )
In the case of recording, the password can be set.
When you set up a password, please carry out
before recording.
Please refer to next page for the procedure of setting
the password.
To record in S-VHS mode on D-VHS tapes:
Press PRO HD to turn off the D-VHS indicator. Then,
set “S-VHS MODE” to “ON” (
੬ pg. 53).
To record in VHS mode on D-VHS tapes:
Press PRO HD to turn off the D-VHS indicator. Then,
set “S-VHS MODE” to “OFF” (
੬ pg. 53).
VDA300U-EN42-49 03.3.12, 4:27 PM 45