JVC SR-VDA300U - Manual (Page 67)

EN
67
Error Codes and Messages
Some error codes and messages may appear on the TV screen when operating the VCR. Refer to the chart below for
the solution.
102
103
104
200
201
202
203
205
300
302
CODE MESSAGE DESCRIPTION
REC PROHIBITED
REC PROHIBITED
CAN NOT DECODE VIDEO OR AUDIO
USE SET TOP BOX OR HDTV TUNER
CAN NOT DECODE VIDEO OR AUDIO
USE SET TOP BOX OR HDTV TUNER
WAIT A MINUTE
CALIBRATING. . .
COPY RESTRICTED PROG OUTPUT
480I VIDEO
COPY RESTRICTED PROG CAN NOT
PLAY BACK
CAN NOT PLAY BACK THIS TAPE
CAN NOT DECODE VIDEO OR AUDIO
USE SET TOP BOX OR HDTV TUNER
COPY RESTRICTED PROG OUTPUT
480I VIDEO
● An attempt was made to make a PRO HD recording of a program for
which only the analog information is copy protected.
● While making a PRO HD recording of a program, a signal in which
only the analog information is copy protected was input to this VCR.
● An attempt was made to dub a PRO HD recording of a digitally copy
protected program.
● While dubbing a PRO HD recording, digitally copy protected
information was input to this VCR.
● This VCR supports copy protection technologies such as DTLA, and
cannot record programs that employ digital copy protection.
● A signal that is not compatible with this VCR was input.
● Switch to the analog input for recording. (It may be possible to play
back the material if using a digital tuner*, etc.)
● An attempt was made to play back a signal that is not supported by
this VCR.
● To play back the signal, use the digital tuner*, etc., that was used to
record the signal.
● Normal playback is being prevented by mosaic noise, etc.
● Wait while the VCR calibrates itself so that it can output a normal
image.
● When playing back a program that was copy protected in 1080i,
720p, or 480p mode, the VCR down-converts to 480i mode for output.
● An attempt was made to play back a tape containing a copy protected
program.
● Even if you record a copy protected program, this VCR cannot play it
back.
● An attempt was made to play back a tape containing an invalid
PRO HD recording.
● A signal format that is not supported by this VCR was input.
● Use a digital tuner*, etc.
● When playing back a program that was copy protected in 1080i,
720p, or 480p mode, the VCR down-converts to 480i mode for output.
* A digital tuner will be released in the future.
VDA300U-EN64-79 03.3.12, 4:24 PM 67