JVC SR-VDA300U - Manual (Page 8)

8
EN
R
Y
L
P B /C B
VIDEO
P R /C R
S VIDEO S VIDEO
AUDIO R
IN(L-1)
IN (L-2)
L (MONO) VIDEO
REMOTE PAUSE/ AV COMPULINK
CABLE BOX
ANTENNA
AUDIO
OUT OUT
OUT
TV
IN
VHF/UHF
IN
DVB-ASI
IN
SYNC
POL
AC120V 1A G
– +
NOTES:
● To make the most of the Super VHS picture performance we
recommend that you use the supplied S-VIDEO cable to
connect your VCR to a TV with an S-VIDEO input connector.
● To operate the VCR with your TV using the S-VIDEO
connection, set your TV to the AV mode using the TV's
remote control.
You can also use the TV/VCR button on the VCR's remote
control to set your TV to the AV mode. (
੬ pg. 60)
● When you play back the picture of 1080i, 720p, 480p image
format, the signal is not output from the S-VIDEO or VIDEO
output connector.
S-VIDEO Connection
CONNECT VCR TO TV
a– Connect both the RF cable and the AV cables to the TV as
explained in step 3 of "Basic Connection" (
੬
pg. 7).
b– Connect the S-Video cable between the S VIDEO OUT
terminal on the rear of the VCR and the S-VIDEO input
connector on the TV.
Component Video Connection
CONNECT VCR TO TV
a– Connect both the RF cable and the AV cables to the TV as
explained in step 3 of "Basic Connection" (
੬
pg. 7).
b– Connect the component video cable between the
Component video output terminals on the rear of the VCR
and the component video input terminals on the TV.
NOTES:
● To change the settings or set the timer program on the menu
screen, switch the TV's input mode for the connection with
Audio cable.
● To view the picture of 480i image format on the TV, or to
select and view ground wave broadcast, connect the
component video cable to the TV's Y/C
B /C R connectors. If
your TV has only the Y/P B /P R connectors, connect also the
S-VIDEO or VIDEO connectors between the VCR and TV.
Antenna or Cable
Flat Feeder
Coaxial Cable
AC Outlet
TV
Matching
Transformer
(not supplied)
Audio Cable
(supplied)
ANTENNA IN
(Antenna or cable input)
AUDIO
OUT
S VIDEO OUT
AC Power
Cord
Back of
VCR
S-Video Cable
(supplied)
RF Cable (supplied)
INSTALLING YOUR NEW VCR (cont.)
S-VIDEO IN
R
Y
L
P B /C B
VIDEO
P R /C R
S VIDEO S VIDEO
AUDIO R
IN(L-1)
IN (L-2)
L (MONO) VIDEO
REMOTE PAUSE/ AV COMPULINK
CABLE BOX
ANTENNA
AUDIO
OUT OUT
OUT
TV
IN
VHF/UHF
IN
DVB-ASI
IN
SYNC
POL
AC120V 1A G
– +
Antenna or Cable
Flat Feeder
Coaxial Cable
AC Outlet
TV
Audio Cable
(supplied)
Component
Video Output
AUDIO
OUT
Back of
VCR
Component
Video Cable
(not supplied)
RF Cable (supplied)
ANTENNA IN
(Antenna or cable input)
Matching
Transformer
(not supplied)
AC Power
Cord
VDA300U-EN02-20 03.3.12, 4:07 PM 8