JVC SR-VDA300U - Manual (Page 50)

50
EN OTHER USEFUL FUNCTIONS (cont.)
* The default setting is bold in the table below.
Ⅵ OPTICAL OUT
Dolby D
2CH-PCM
Audio settings [AUDIO]
R
Y
L
P B /C B
VIDEO
P R /C R
S VIDEO S VIDEO
AUDIO R
IN(L-1)
IN (L-2)
L (MONO) VIDEO
REMOTE PAUSE/ AV COMPULINK
CABLE BOX
ANTENNA
AUDIO
OUT OUT
OUT TV
IN
VHF/UHF
IN
DVB-ASI
IN
SYNC
POL
AC120V 1A G
– +
Amplifier equipped
with Dolby Digital
decoder
Note for connection:
Remove the connector cover
from the VCR and the
protection cap from the cable.
This VCR
This VCR can send the Dolby Digital bitstream or PCM Audio to external
devices.
When you play back a tape including the Dolby Digital bitstream, and if
you have a device equipped with Dolby Digital decoder, set this
function to “Dolby D”.
If not, set this function to “2CH-PCM”.
The digital audio is output only when you play back a tape recorded in
D-VHS format. The digital audio is not output when you play back a
tape recorded in S-VHS/VHS format.
When this function is set to “ON”;
● If a SAP program is received, the SAP audio is recorded on both the
normal and Hi-Fi tracks. The main audio is not recorded.
● If a non-SAP program is received, the main audio is recorded on both
the Hi-Fi and normal tracks.
When this function is set to “OFF”, the SAP audio cannot be recorded.
Ⅵ 2ND AUDIO REC
ON
OFF
VDA300U-EN48-55 03.3.12, 4:20 PM 50