Diesel engine oil, Lubricant storage – John Deere CD4039DF008 User Manual
Page 35
Fuels, Lubricants and Coolant
CD,ENOIL
–19–10OCT97–1/1
DIESEL ENGINE OIL
TS1661
–UN–10OCT97
Use oil viscosity based on the expected air temperature
range during the period between oil changes.
The following oil is preferred:
•
John Deere PLUS-50
The following oil is also recommended:
•
John Deere TORQ-GARD SUPREME TORQ-GARD
SUPREME
Other oils may be used if they meet one or more of the
following:
•
API Service Classification CG-4
•
API Service Classification CF-4
•
ACEA Specification E3
•
ACEA Specification E2
Multi-viscosity diesel engine oils are preferred.
If diesel fuel with sulfur content greater than 0.5% is used,
reduce the service interval by 50%.
PLUS-50 is a registered trademark of Deere & Company.
TORQ-GARD SUPREME is a trademark of Deere & Company
DX,LUBST
–19–18MAR96–1/1
LUBRICANT STORAGE
Your equipment can operate at top efficiency only
when clean lubricants are used.
Use clean containers to handle all lubricants.
Whenever possible, store lubricants and containers in
an area protected from dust, moisture, and other
contamination. Store containers on their side to avoid
water and dirt accumulation.
Make certain that all containers are properly marked to
identify their contents.
Properly dispose of all old containers and any residual
lubricant they may contain.
10-3
112699
PN=35