Checking fuel filter – John Deere CD4039DF008 User Manual

Page 67

Advertising
background image

Maintenance/As required

DPSG,CD03523,28

–19–12JUL99–1/1

CHECKING FUEL FILTER

RG9868

UN–15JAN99

RG8013B

–UN–15JAN99

Periodically the fuel filter should be checked for water or
debris.

IMPORTANT: Drain water into a suitable container

and dispose of properly.

1. Loosen drain plug (B) at bottom of fuel filter two or

three turns.

2. Loosen air bleed plug two full turns (A) on fuel filter

base and drain water from bottom until fuel starts to
drain out.

3. When fuel starts to drain out, tighten drain plug

securely.

4. After draining water from the fuel filter, the filter must

be primed by bleeding all air from the fuel system.
Operate primer lever of the fuel supply pump (C) until
fuel flow is free from air bubbles.

5. Tighten bleed plug securely, continue operating hand

primer until pumping action is not felt. Push hand
primer inward (toward engine) as far as it will go.

If the fuel system needs further bleeding of air, see
BLEEDING THE FUEL SYSTEM.

50-5

112699

PN=67

Advertising