John Lewis JLBIDW 1201 - Manual (Page 23)

The washing and drying results are not satisfactory
You did not put the items
correctly in the baskets, water
did not touch all surfaces. Put the items correctly in the
baskets.
The spray arms could not turn
freely. Incorrect position of the
items in the baskets. Make sure that an incorrect
position of the items do not
cause the blockage of the spray
arms.
The filters are dirty or not
assembled and installed
correctly. Make sure that the filters are
clean and correctly assembled
and installed.
The quantity of detergent was
not sufficient or missing. Make sure that the quantity of
detergent is sufficient.
Limescale particles on the
dishes. The salt container is empty. Fill the salt container with
dishwasher salt.
Incorrect level of the water
softener adjustment. Adjust the water softener with
the correct level.
The salt container cap is not
closed correctly. Make sure that the salt
container cap is closed
correctly.
There are streaks, whitish
stains, or a bluish layer on
glasses and dishes. The rinse aid quantity is too
high. Decrease the rinse aid quantity.
Dry water drop stains on
glasses and dishes. The rinse aid quantity is too
low. Increase the rinse aid quantity.
The detergent can be the
cause. Use a different brand of
detergent.
The dishes are wet. The washing programme was
without a drying phase or with
a decreased drying phase. For better drying results, keep
the door ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is
empty. Fill the rinse aid dispenser with
rinse aid.
23