John Lewis JLBIDW 1201 - Manual (Page 26)

max 85 cm
min 40 cm
max 400 cm
The drain hose can face either to the right
or left of the appliance.
Ensure the drain hose is not bent or
squashed as this could prevent or slow
down the discharge of water.
The sink plug must not be in place when the
appliance is draining as this could cause the
water to syphon back into the appliance.
If you use a drain hose extension, the
internal diameter must be no smaller than
the diameter of the hose provided.
Likewise the internal diameter of the
couplings used for connections to the waste
outlet must be no smaller than the diameter
of the hose provided.
Our appliances are supplied with a security
device to protect against the return of dirty
water back into the appliance. If the spigot
of your sink has a "no return valve"
incorporated this can prevent the correct
draining of your appliance. We therefore
advise you to remove it.
When connecting the drain hose to an
under sink trap spigot, the entire plastic
membrane (A) must be removed. Failure to
remove all the membrane will result in food
particles building up over time eventually
blocking the appliance drain hose spigot.
26