John Deere OMM141979 J9 - Manual (Page 20)

Operating - 16
OPERATING
mechanism.
2. Pull lift lever (A) reward out of “LOWER” position
(shown), release button (B) and continue to pull lever all-
the-way reward until a loud metallic-click is heard,
signalling lever is in “LOCK-OUT” position, then release lift
lever—it is now locked into “RAISE” position, lift lever in
close proximity to steering wheel.
3. Move to left side of tiller housing—grasp handle (C) to
raise tiller housing to align transport locking pin (D) and
transport bracket locking hole (E). Rotate transport locking
pin (D) reward to unlock rolled pin (F) from frame slot (G)
and release transport locking pin so it springs into “LOCK-
OUT” position in transport bracket locking hole (E).
4. Slowly lift up and push down on handle (C) before
releasing it to ensure tiller housing is “LOCKED-OUT” into
“TRANSPORT” position.
C
G
D
M96294
F
E